AJAZZ NACODEX AK33 Bluetooth & Wired Mechanical Keyboard, Rainbow LED Backlit, Blue Switch

Bluetooth Connection:

1. First turn on the power switch behind the keyboard

2. Switch the keyboard to the wireless Bluetooth state: press FN+TAB to switch (if the keyboard is already in wireless mode, no need to switch)

Note: If you press and hold the FN+1 key for about three seconds, and the 1 key does not flash, it means that the keyboard is in wired mode (the same is true for pressing FN+2/3).

Press FN+TAB to switch, and the keyboard flashes twice, indicating that the switch is successful

3. Long press the FN+1 key on the keyboard for about 3 seconds, the 1 key flashes quickly

4. Turn on the computer Bluetooth device-add Bluetooth-Bluetooth search

5. When the Bluetooth “AK33 Bluetooth 5.0 Keyboard” appears, click to connect

6. After the Bluetooth connection is successful, the 1 button will stop flashing

7. If you need to continue to connect to the second electronic device, you can continue to press FN+2 for about 3 seconds, the 2 key flashes quickly,

Click the Bluetooth “AK33 Bluetooth 5.0 Keyboard” in the second electronic device to connect, and connect to the third electronic device in the same way

Note:When using electronic device 1, short press FN+2 or FN+3 to switch between electronic device 2 and electronic device 3. Three Bluetooth electronic devices can be connected at the same time.

Note: If FN+1 is already connected to device 1, then it can only connect to device 1, and cannot continue to connect to device 2.

Only FN+2 can connect to device 2, and FN+3 can connect to device 3. If you want FN+1 to connect to device 2 or device 3,

You need to clear all the connection records of the keyboard and restore the factory settings.

Example:

If the keyboard Bluetooth FN+1 is already connected to your computer 1, and you want to switch the Bluetooth channel, use FN+2 to connect to your computer 1.

First delete all the connection records about “AK33 Bluetooth 5.0 Keyboard” in computer 1.

Then long press FN+ESC to clear the keyboard connection record. It is best to turn off the switch on the back of the keyboard and then turn it on again.

To ensure that Bluetooth information stops transmitting. Open the Bluetooth search of the computer device, wait for the Bluetooth record on the computer device to disappear, and then press FN+2 to connect to the computer 1.

The status of Bluetooth unable to connect appears:

1. Long press FN+ESC to clear the keyboard connection record, you can clear it twice more(When long press FN+ESC, the keyboard backlight flashes, indicating that the operation is successful)

2. Turn off the power switch behind the keyboard

3. Clear the Bluetooth “AK33 Bluetooth 5.0 Keyboard” connection record in the computer, and then continue to open the Bluetooth search to ensure that the Bluetooth “AK33 Bluetooth 5.0 Keyboard” does not appear on the computer. Because there is a delay in Bluetooth information, you must wait for the Bluetooth record on the computer device to disappear before making the second connection.

4. After the Bluetooth information stops pairing and does not appear on the computer device, turn on the keyboard switch and reconnect the Bluetooth.