Headphones
Microphone
Webcam
SAMSUNG 980 PRO SSD with Heatsink 1TB PCIe Gen 4 NVMe M.2
Original price was: 5.499,00 L.E.4.799,00 L.ECurrent price is: 4.799,00 L.E.
Out of stock
- • True PCIe® 4.0 NVMe™ speed (up to 7,000 MB/s for seq. reads, 5,100MB/s for seq. writes)
• Ideal for heavy computing, high resolution graphics and PC gaming.
• For console gaming, compatible only with Playstation®
Next-level performance
with maximum heat control
Unleash the power of the Samsung 980 PRO with Heatsink for next-level computing and gaming. With a PCIe® 4.0 NVMe™ interface, get up to 2x the data transfer rate of PCIe® 3.0* while remaining compatible with PCIe® 3.0.
The integrated heatsink disperses heat to maintain speed, power efficiency, and thermal control, preventing downtime from overheating on Playstation® 5 and PCs.
Top Speed
Get read speeds up to 7,000 MB/s¹ with 980 PRO with Heatsink and push the limits of what SSDs can do. Powered by an in-house controller designed to harmonize the flash memory components and the interface for top speed – with a PCIe® 4.0² interface that’s 2x faster than PCIe® 3.0 SSDs³ and 12x faster than Samsung SATA SSDs⁴ – every component of this NVMe™ SSD is manufactured by Samsung for
performance that lasts.
A winning combination
The 980 PRO with Heatsink delivers an additional layer of
thermal control for smart heat management to reduce heat. Achieve fully immersive gameplay with sustained high-performance bandwidth and throughput for heavy-duty applications in gaming, graphics, data analytics, and more. Load games fast, so you can play more and wait less.
Smart thermal control
High-performance SSDs require high-performance thermal control. The 980 PRO with Heatsink uses Samsung’s own nickel-coated high-end controller to deliver effective thermal control of the NAND chip. With the added heatsink, play confidently on PlayStation®5 gaming consoles and PC systems without worries of sudden performance drops from overheating.
A Perfect Fit for PlayStation®5
The 980 PRO with Heatsink has a thin 8.6mm housing, which perfectly fits the PlayStation®5. Its slim size and optimized power efficiency are also ideal for building high-performance PC computing and gaming systems.
Samsung Magician software
Unlock the full potential of 980 PRO with Samsung Magician’s advanced, yet intuitive optimization tools. Monitor drive health, optimize performance, protect valuable data, and receive important updates with Magician to ensure you’re always getting the best performance out of your SSD.
World’s No.1 Flash Memory Brand
Experience the performance and reliability that you can only get from the world’s number one brand for flash memory since 2003. All firmware and components, including Samsung’s world-renowned DRAM and NAND, are produced in-house, allowing end-to-end integration for quality you can trust.
- General Feature
Product Type
NVMe™ SSD
Family Line
980 PRO with Heatsink PCIe® 4.0 NVMe™ SSD
Capacity
1TB
Interface
PCIe® 4.0
Compatibility
PC & Playstation® 5
- Performance
Encryption
AES 256-bit (SED), TCG V2.0, Encrypted Drive (IEEE1667)
- Type
Interface
PCIe Gen 4.0 x4, NVMe 1.3c
Read/Write Speeds
7,000/5,000MB/s
Usage Application
Client PCs, Game Consoles
- Storage
Capacity
1,000GB (1GB=1 Billion byte by IDEMA) * Actual usable capacity may be less (due to formatting, partitioning, operating system, applications or otherwise)
- Key Features
Sequential Read Speed
Up to 7,000 MB/s * Performance may vary based on system hardware & configuration
Sequential Write Speed
Up to 5,000 MB/s * Performance may vary based on system hardware & configuration
Compatibility
980 PRO is backward compatible with PCIe 3.0. Sequential performances (up to): 3450 MB/s (1TB), 3470 MB/s (2TB) for writes. Random (up to): 690K IOPS (1TB), 680K IOPS (2TB) for reads, 660K IOPS (1TB), 630K IOPS (2TB) for writes.
Cache Memory
Samsung 1GB Low Power DDR4 SDRAM
Trim Support
Supported
S.M.A.R.T. Support
Supported
GC (Garbage Collection)
Auto Garbage Collection Algorithm
WWN Support
Not supported
Device Sleep Mode Support
Yes
Internal Storage
Samsung V-NAND 3-bit MLC
Thermal protection
Heatsink
Heatsink
Yes
M.2 2280
Yes
- General
Average Power Consumption (system level)
*Average: 6.2 W*Maximum: 8.9 W (Burst mode)* Actual power consumption may vary depending on system hardware & configuration
Power consumption (Idle)
Max. 35 mW * Actual power consumption may vary depending on system hardware & configuration
Reliability (MTBF)
1.5 Million Hours Reliability (MTBF)
- Environmental Specs
Shock
1,500 G & 0.5 ms (Half sine)
- Form Factor
Product
M.2 (2280) with Heatsink complying PCI-SIG® D8 standard
- Dimensions (W x H x D)
Product
24 x 80 x 8.6 mm (with heatsink)
- Weight
Product
Max 30.5g
| Capacity |
1TB |
|---|---|
| Brand |
Only logged in customers who have purchased this product may leave a review.
Related products
2.5 SATA to USB 3.0 External Hard Drive Enclosure for 2.5 Inch SSD & HDD 9.5mm 7mm External Hard Drive Case Supports
- Portable Data Storage: SATA drive enclosure support most 2.5 inch 7mm/9.5mm SATA I/II/III HDD and SSD up to 4TB (Max). You can easily connect the old drive to transfer files to PC, laptop, router, PS4 or as a USB external hard drive.
- Set up in 3 seconds: Plug and play with tool-free installation, no driver needed. Note: Some 2.5-inch HDD require 12v voltage input, this product only supports 5v output to the HDD, please check before using.
- 5Gbps UASP Fast Speed: The Reletech ssd/hdd drive enclosure is design with SATA to USB3.0 protocol with the maximum transfer rate can reach up to 5Gbps, at the same time, the external hdd enclosure can support UASP accelerated transmission protocol to greatly improving the storage or backup efficiency of the devices.
- The reletech 2.5" sata ssd external enclosure can support the 2.5inch sata port 7/9.5mm hdd/ssd. Max 4TB capacity can helps to storage the music, movies, photos and so on. This 2.5 hard drive enclosure also compatible with PC, TV, PS4, Xbox and other devices.
- Package included: 1*2.5 inch hard drive enclosure, 1* micro B to usb 3.0 cable.
FIDECO M.2 NVMe SSD Enclosure, USB 3.2 Gen 2 to M.2 NVMe Enclosure, PCIe NVMe Adapter for M & M+B Key
GMM NVMe M.2 Duplicator Dual-Bay Offline Clone NVMe Enclosure, Tool-Free USB to NVME Adapter with Cooling Fan,10Gbps Docking Station for M2 2230/2242/2260/2280
ONTEN 5211 USB-A to SATA Adapter Compatible with all standard 2.5-inch SATA drives
ONTEN UHD2 USB 3.0 To 2.5 HDD External Case
- Plug and play, support Windows XP, Windows 7, Windows 8 and Windows 10.
- Support up to 5TB HDD.
- Light weight & compact in size : 123.5mm x 78.5mm x 13.5mm
- Very good and consistent quality, sold this product more than 10 years, defect rate less than 1%.
- Come with USB 3.0 AM/MICRO cable.
- Internal Interface : SATA.
- External Interface : USB 2.0/USB 3.0.
- Plug and Play
Orico 2.5 Inch Portable Waterproof SSD HDD Hard Drive Protection Bag (Blue)
- 【2.5 inch hard drive case】Internal dimensions: 140 x 90 x 25 mm, Weight: 100g; ideal for all 2.5 inch hard drives / SSD and other small electronic accessories such as power banks less than 140 x 90 mm
- 【Sturdy HDD Case】 The sturdy EVA hard shell and thick polyester coating prevent extreme durability and collisions so you can safely stack, stack, and take it with you on business trips
- 【Safety Protection】Waterproof, shockproof, dustproof and portable external hard drives, integrated elastic bands, mesh weaving, durable nylon molding insert and groove outer
- 【Stylish and simple】The well-processed PHD-25 hard drive enclosure by Orico uses textured EVA material with a stylish and simple design; multiple colourful pockets give you more options
- 【Protection and storage】Put your hard drives and small computer accessories in this storage bag so that not only protect against dust and moisture, but also make your work and life tidy and refined
Reviews
There are no reviews yet.